Onion Peeling Machine USA

Onion Peeling Machine

The feeding hopper automatically collects the onions, after which the feed operator places them on the carrier bands in a manner that aligns the top and tail of the onions horizontally. The FLP-75 onion peeling machine is capable of cutting both the upper and lower parts of the onion simultaneously with a single motion.

The FLP-75 onion peeling machine is suitable for peeling onions that range in size from 45 mm to 105 mm, and additional part replacement is not necessary during the peeling process. Our experienced engineers, with the aid of the R&D department and the pneumatic grading system, ensure minimal waste while maintaining the integrity of the product’s form. The machine also features a variable speed control that the feed operator can easily adjust, as well as a digital display that monitors the quantity of output per minute.

With the use of compressed air, this onion peeling machine effectively cleans the outer skin of onions without causing any damage to the product.

Onion Peeling Machine Features FLP-75

To prevent bunker filling in special products, an automatic level loading system has been designed.
Onions are automatically loaded from the bunker.
The double blade system, placed sideways, enables cutting of the top and tail of the onion in one swift motion.
The double knife system, equipped with depth and tension control adjustment, facilitates the easy removal of the outer skin of the onion.
A six-port skinning wheel, with an outer cover, allows for air supply into the skinning wheel through the rotary air joint.
An unloading and sliding section is available for product and skin separation, and there are three pieces of inverter drive.
This machine complies with CE regulations for health and safety protection. Please specify the local voltage when placing an order. Additional enhanced security systems are also available.

Onion Peeling Machine Technical Details FLP-75

Product Size Range: Good for onions in diameter of 45-105 mm

Capacity :Up to 3,000 units per hour

The Material of Construction :Stainless steel

Product Contact Parts :All stainless steel

Product Contact Parts : All stainless steel

Electricity :2,2 kw 50 hz 1 pn 220-240 volt

Air Consumption :2,70m³/min 8 kg/cm² 8 bar @95cfm

Weight :Approx. 935 kg

Advantages Of The Onion Peeling Machine FLP-75

This machine boasts a straightforward installation process and ease of use.
Cleaning and disinfecting the machine is simple.
No parts need to be changed for the peeling operation.
Maximum output is achieved with minimal labor requirements.
Different sizes of onions can be easily handled.
A quality selection and positioning process is facilitated by the extended working area.
Stripping blades can be adjusted according to the onion’s quality for precise cutting.
Electric and air supplies can be easily connected.
Minimal grading and sizing of the product are necessary.
Spare parts can be easily maintained and replaced.
Cleaning is a breeze.
An additional set of knives is provided free of charge.
A stock compartment is available for waste collection.

Onion Peeling Machine USA